Trykk Manometer med Bourdon tube og integrert Trykk Transmitter. Her får en manometers lettleste vising med mulighet til å ta ut et analogt signal og også mulighet for bryte.
| Models and ND | SMR-36 100 | SMR-36 160 |
|---|---|---|
| Ranges in bar | 0…2.5, 4, 6, 10, 16, 25, 40, 60, 100, 160, 250, 400 -1 / 3, -1 / 5, -1 / 9, -1 / 15, -1 / 24 |
|
| Application | Constant load: up to full scale value Alternating load: 0.9 × full scale value Short time: 1.3 × full scale value |
|
| Case | stainless steel 1.4301 with blow-out plug for pressure build-up protection safety separation wall between measuring element and dial |
|
| Bezel | CrNi steel | |
| Window | laminated glass | |
| Sensor element | stainless steel measuring cell, thin film technology |
|
| Wetted parts | CrNi steel O-ring Viton (FKM) |
|
| Pressure connection | SW 22, CrNi steel | |
| Connection thread | G 1/2 B | |
| Repeatability | < 0.05 % of full scale value | |
| Stability per year | < 0.2 % full scale value in rated conditions | |
| Electrical connection | junction box with screwing Pg 13.5 | |
| Power supply | 12…30 VDC (14…30 VDC for output 0…10 V) |
|
| Power consumption | Output 4…20 mA: signal current Voltage output 8 mA |
|
| Permissible load | Current 2-wire: Rmax = ((UB-UBmin) / 0.02) Ohm Voltage: Rmin = 10 kOhm |
|
| Temp. comp. range | -28…82 °C | |
| Temp. influence | 0.3 % / 10 K, zero point and measuring element (0…50 °C) |
|
| Response time | < 1 ms (from 10 % to 90 % of full scale value) |
|
| Temperatures | Medium: -20°C to 80°C Ambient: -25°C to 60°C |
|
