Denne Industri versjonen er et pålitelig manometer med hus og våte deler i Kobberlegering. Levere i størrelsene 63mm, 100mm og 160mm.
Nominal size 100 and 160, accuracy 1 according to EN 837-1
For alle gassformige og flytende medier som ikke angriper kobberlegeringer eller er høyviskøse.
| Størrelse: | ND100 / ND160 |
| Maks måleområdet: | 0 – 1000 bar / -1 – 24 bar |
| Min måleområdet: | 0 – 0,6 bar / -0,6 – 0 bar |
| Nøyaktighet: | 1,0% |
| Sensor: | Bourdon tube |
| Kapslingsgrad: | IP54 / Fylt: IP65 |
| Material hus: | CrNi stål (304) |
| Glass: | Instrument glass |
| Material element: | Kobber legering |
| Prosess tilkobling: | G 1/2 B |
| Tilvalg | ND40 | ND50 | ND63 | ND100 | ND160 |
|---|---|---|---|---|---|
| Front flange with three holes in CrNi-steel | – | – | X | X | X |
| Triangular front flange with Clamp fixing in CrNi-steel | – | – | X | X | X |
| Back flange steel black | – | – | X | X | – |
| Rear edge of stainless steel | – | – | X | X | X |
| Red mark on the dial | – | – | X | X | X |
| Pointer on the dial (not adjustable from the outside) | – | – | X | X | X |
| Pointer in window with removable button | – | – | X | X | X |
| 2-position pointer in window with fixed button | – | – | – | X | X |
| Trailing pointer | – | – | X | X | X |
| Trailing pointer with adjustable torque | – | – | – | X | X |
| 2-position Trailing pointer (from 6 bar) | – | – | – | X | X |
| Movement of stainless steel | – | – | – | X | X |
| Laminated safety glass | – | – | X | X | X |
| Throttle made of copper alloy | – | – | X | X | X |
| Throttle made of CrNi steel | – | – | X | X | X |
| Oil and grease free up to 600 bar | – | – | X | X | X |
| Oil and grease-free for oxygen, up to 600 bar | – | – | X | X | X |
| Silicone-free version | X | X | X | X | X |
| Special thread for connection of copper alloy | – | – | X | X | X |
| Special thread for connection of CrNi steel | – | – | X | X | X |
| Leaded devices | – | – | – | X | X |
| Adjusting direction 90° differing | – | – | X | X | X |
| Connection position from six o’clock position differing | – | – | X | X | X |
| Medium temperature up to 130°C with special solder | – | – | X | X | X |
| Medium temperature up to 150°C with hard solder | – | – | X | X | X |
| Medium temperature up to 200°C, only stainless steel version | – | – | X | X | X |
| Any additional color printing to the black base color | – | request | request | X | X |
| Test certificate with 5 measuring points (Class 1.0) | – | X | X | X | X |
| Test certificate with 10 measuring points (Class 0.6) | – | – | – | X | X |
| Factory certificate 2.2 EN 10204 | – | X | X | X | X |
| Factory certificate 3.1 EN 10204 | – | X | X | X | X |
| Stamp costs per instrument | – | X | X | X | X |
| Accuracy class 1 for MR-2x, MR-3x, ND63 Class 1.6 | – | – | X | – | – |
| Accuracy class 0.6 for Bourdon tube pressure gauge Class 1 | – | – | – | X | – |
| Accuracy class 0.25 for Precision pressure gauge Class 0.6 | – | – | – | – | X |
| ATEX-certificate | – | – | – | X | X |
