Trykkmanometer med membranmåleelement i industri- og rustfri utførelse for viskøse applikasjoner. Levere i størrelsene 100mm og 160mm.
Nominal size 100 and 160, accuracy 1,6 according to EN 837-1
| Versjon | Industri, Rustfrittstål |
|---|
| Model and ND | MP-20 100 | MP-20 160 | MP-20 F100 | MP-20 F160 |
|---|---|---|---|---|
| Version | with glycerine filling | |||
| Connection | bottom | |||
| Accuracy class | 1.6, ranges under 600 mbar with filling only Kl. 2.5 | |||
| Ranges | in mbar: 0…10, 16, 25, 40, 60, 100, 160, 250 in bar: 0…0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 25 -0.6/0, -1/0, -1/+0.6, -1/+1.5, -1/+3, -1/+5, -1/+9, -1/+15 |
0…40, 60, 100, 160, 250 | ||
| Application | Constant load: full scale value Alternating load: 0.9 × full scale value Overload protection: 1.3 × full scale value short time |
|||
| Case | CrNi steel | Steel black | CrNi steel | |
| Bezel | CrNi steel | Steel black | CrNi steel | |
| Window | Glass lens | Laminated safety glass | ||
| Dial | Aluminium white, scale black | |||
| Pointer | Aluminium, black | |||
| Movement | Copper alloy, bearing parts nickel silver | |||
| Flange diameter | 160 mm up to 250 mbar, 100 mm from 0.4 bar | |||
| Measuring element | CrNi steel, from 2.5 bar Duratherm 600 | |||
| Lower flange | SW 22, Steel zincing | |||
| Connection | G 1/2 B and DIN-flange DN 15, 20, 25 and 50, for all PN 40 | |||
| Protection | IP54 according to EN 60529 / IEC 529 | IP54 according to EN 60529 / IEC 529 | ||
| Temperatures | Medium: -20°C to 100°C Ambient: -25°C to 60°C |
|||
| Model and ND | MP-30 100 | MP-30 160 | MP-30 F100 | MP-30 F160 |
|---|---|---|---|---|
| Version | with glycerine filling | |||
| Connection | bottom | |||
| Accuracy class | 1.6, Ranges < 400 mbar with glycerine filling: 2.5 | |||
| Ranges in mbar | 0…10, 16, 25, 40, 60, 100, 160, 250 | 0…40, 60, 100, 160, 250 | ||
| Ranges in bar | 0…0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 25 | |||
| Compound ranges | -0.6 / 0, -1 / 0, -1 / +0.6, -1 / +1.5, -1 / +3, -1 / +5, -1 / +9, -1 / +15 |
|||
| Application | Constant load: full scale value Alternating load: 0.9 × full scale value Overload protection: 1.3 × full scale value short time |
|||
| Case | CrNi steel | |||
| Bezel | CrNi steel | |||
| Window | Laminated safety glass | |||
| Dial | Aluminium white, scale black | |||
| Pointer | Aluminium, black | |||
| Movement | CrNi steel | |||
| Flange diameter | 160 mm up to 250 mbar, 100 mm from 0.4 bar |
|||
| Measuring element | CrNi steel, from 2.5 bar Duratherm 600 | |||
| Lower flange | SW 22, CrNi steel | |||
| Connection | G 1/2 B and DIN-flange DN 15, 20, 25 and 50, for all PN 40 |
|||
| Protection | IP54 according to EN 60529 / IEC 529 | IP65 according to EN 60529 / IEC 529 | ||
| Temperatures | Medium: -20°C to 100°C Ambient: -25°C to 60°C |
|||
| Scale ranges up to | 400 mbar | |||||
| Measuring flange diameter | 160 mm | |||||
| Surcharges for flange version according to DIN EN 1092-1 | ||||||
|---|---|---|---|---|---|---|
| DN | Diaphragm-type | Material | PN | Article-No. | ||
| DN 15 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 160 DIN 15-2 | ||
| DN 20 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 160 DIN 20-2 | ||
| DN 25 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 160 DIN 25-2 | ||
| DN 40 | MP-20, MP-20 F, KMP-20, KMP-20 F | Steel, zinc plated | PN 40 | M FL 160 DIN 40-2 | ||
| DN 50 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 160 DIN 50-2 | ||
| DN 65 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 160 DIN 65-2 | ||
| DN 80 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 160 DIN 80-2 | ||
| DN 15 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 160 DIN 15-3 | ||
| DN 20 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 160 DIN 20-3 | ||
| DN 25 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 160 DIN 25-3 | ||
| DN 40 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 160 DIN 40-3 | ||
| DN 50 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 160 DIN 50-3 | ||
| DN 65 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 160 DIN 65-3 | ||
| DN 80 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 160 DIN 80-3 | ||
| Surcharges for flange version according to ASME B16.5 | ||||||
| DN | Diaphragm-type | Material | PN | Article-No. | ||
| 1/2″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 150 | M FL 160 A150 15-2 | ||
| 3/4″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 150 | M FL 160 A150 20-2 | ||
| 1″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 150 | M FL 160 A150 25-2 | ||
| 2″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 150 | M FL 160 A150 50-2 | ||
| 1/2″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 300 | M FL 160 A300 15-2 | ||
| 3/4″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 300 | M FL 160 A300 20-2 | ||
| 1″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 300 | M FL 160 A300 25-2 | ||
| 2″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 300 | M FL 160 A300 50-2 | ||
| 1/2″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 150 | M FL 160 A150 15-3 | ||
| 3/4″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 150 | M FL 160 A150 20-3 | ||
| 1″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 150 | M FL 160 A150 25-3 | ||
| 2″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 150 | M FL 160 A150 50-3 | ||
| 1/2″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 300 | M FL 160 A300 15-3 | ||
| 3/4″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 300 | M FL 160 A300 20-3 | ||
| 1″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 300 | M FL 160 A300 25-3 | ||
| 2″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 300 | M FL 160 A300 50-3 | ||
| Scale ranges up to | 0.6 bar | ||||
| Measuring flange diameter | 100 mm | ||||
| Surcharges for flange version according to DIN EN 1092-1 | |||||
|---|---|---|---|---|---|
| DN | Diaphragm-type | Material | PN | Article-No. | |
| DN 15 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 100 DIN 15-2 | |
| DN 20 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 100 DIN 20-2 | |
| DN 25 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 100 DIN 25-2 | |
| DN 40 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 100 DIN 40-2 | |
| DN 50 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 100 DIN 50-2 | |
| DN 65 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 100 DIN 65-2 | |
| DN 80 | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | PN 40 | M FL 100 DIN 80-2 | |
| DN 15 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 100 DIN 15-3 | |
| DN 20 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 100 DIN 20-3 | |
| DN 25 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 100 DIN 25-3 | |
| DN 40 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 100 DIN 40-3 | |
| DN 50 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 100 DIN 50-3 | |
| DN 65 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 100 DIN 65-3 | |
| DN 80 | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | PN 40 | M FL 100 DIN 80-3 | |
| Surcharges for flange version according to ASME B16.5 | |||||
| DN | Diaphragm-type | Material | PN | Article-No. | |
| 1/2″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 150 | M FL 100 A150 15-2 | |
| 3/4″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 150 | M FL 100 A150 20-2 | |
| 1″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 150 | M FL 100 A150 25-2 | |
| 2″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 150 | M FL 100 A150 50-2 | |
| 1/2″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 300 | M FL 100 A300 15-2 | |
| 3/4″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 300 | M FL 100 A300 20-2 | |
| 1″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 300 | M FL 100 A300 25-2 | |
| 2″ | MP-20, MP-20 F, KMP-20, KMP-20 F | Galvan. steel | Class 300 | M FL 100 A300 50-2 | |
| 1/2″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 150 | M FL 100 A150 15-3 | |
| 3/4″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 150 | M FL 100 A150 20-3 | |
| 1″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 150 | M FL 100 A150 25-3 | |
| 2″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 150 | M FL 100 A150 50-3 | |
| 1/2″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 300 | M FL 100 A300 15-3 | |
| 3/4″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 300 | M FL 100 A300 20-3 | |
| 1″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 300 | M FL 100 A300 25-3 | |
| 2″ | MP-30, MP-30 F, KMP-30, KMP-30 F | CrNi-Steel | Class 300 | M FL 100 A300 50-3 | |
| Description | ND 100 | ND 160 |
|---|---|---|
| Safety case with blow out back wall, with internal separating wall (S3) | ||
| Red mark on the dial | ||
| Pointer on the dial (not adjustable from the outside) | ||
| Pointer in the window with removable button | ||
| 2-position pointer in window with fixed button | ||
| Trailing pointer | ||
| 2-position Trailing pointer (from 60 mbar) | ||
| Adjustable pointer with transmission, aluminum | ||
| Movement of stainless steel | ||
| Throttle made of CrNi-steel | ||
| Laminated safety glass | ||
| Oil and grease free | ||
| Silicone-free version | ||
| Leaded devices | ||
| Adjusting direction 90° differing | ||
| Connection position from six o’clock position differing | ||
| Channel bore diameter of 10 mm drilled with MP in industry version |
||
| Channel bore diameter of 10 mm drilled with MP in stainless steel version |
||
| Overpressure 2 times, but max. 40 bar | ||
| Overpressure 10 times, but max. 40 bar Measuring flange diameter 100 mm |
||
| Overpressure 10 times, but max. 40 bar Measuring flange diameter 160 mm |
||
| Protection film of PTFE for Measuring flange diameter 100 mm | ||
| Protection film of PTFE for Measuring flange diameter 160 mm | ||
| Protection film of TANTAL for Measuring flange diameter 100 mm | ||
| Protection film of TANTAL for Measuring flange diameter 160 mm | ||
| Protection film of fine silver for Measuring flange diameter 100 mm | ||
| Production of the dial plate | ||
| Any additional color printing to the black base color | ||
| Test certificate with 5 measuring points | ||
| Test certificate with 10 measuring points | ||
| Factory certificate 2.2 EN 10 204 | ||
| Factory certificate 3.1 EN 10 204 | ||
| Stamp costs per instrument | ||
| ATEX-certificate | ||
| Description | Article-No. | ND 100 | ND 160 |
|---|---|---|---|
| Measuring flange diameter 100 mm with thread connection |
M PTFE 100-10 | ||
| Measuring flange diameter 160 mm with thread connection |
M PTFE 160-10 | ||
| Measuring flange diameter 100 mm with internal thread DN 15 DIN-flange connection DN 20 DIN-flange connection DN 25 DIN-flange connection 1/2″ ASME-flange connection |
M PTFE 100-15 M PTFE 100-20 M PTFE 100-25 M PTFE 100-16 |
||
| Measuring flange diameter 100 mm with open DIN-flange connection DN 50 or with open ASME-flange connection 2″ |
M PTFE 100-50 | ||
| Measuring flange diameter 160 mm with open DIN-flange connection DN 15, DN 20 or DN 25 or with open ASME-flange connection 1/2″, 3/4″ or 1″ |
M PTFE 160-15 | ||
| Measuring flange diameter 160 mm with open DIN-flange connection DN 50 or with open ASME-flange connection 2″ |
M PTFE 160-50 |
